Zainstaluj pomocniczy ogrzewanie system na forma

Zainstaluj pomocniczy ogrzewanie system na forma

Jeśli pleśń pleśń jest wyższa, ogrzewanie by a ogrzewanie płyta sama nie może spełnić potrzeba równomiernego ogrzewania. W tym czasie, pomocniczy ogrzewanie system potrzebuje do być zainstalowany na pleśnia, który może być złożony z a ogrzewanie płyta, a ogrzewanie płyta, a ogrzewanie rura i a żelazo rdzeń.

The clamping structure of the mold is closely related to the heating, heat preservation and cooling system of the mold, and at the same time, it provides certain convenient features for mold replacement, loading and unloading. Most designers simply make a few mounting holes on the mold for the convenience of the drawing. For example, most of the molds do not design heating devices separately, but install heating plates on the upper and lower pressure plates of the press to simplify the processing of small and medium-sized molds. Only the modules that constitute the main structure of the cavity remain in the mold structure. At this time, the mold can be fixed by an injection mold—fix the mold on the upper and lower templates with a pressure plate. Design the space for fixing the pressing plate on the heating plate mold. This design can be used not only for movable stampers, but also for stampers with simple ejection mechanisms. It is only necessary to consider that the position of the ejector pin does not conflict with the heating tube in the design of the heating plate. It is also possible to use the mold base of one mold to modify multiple molds to simplify mold manufacturing costs.

www.superbheater.com